WHY WE ♥
▸ Using low-stress ultrasonic vibrations (26,000 vibrations per second) with splashing water, it removes keratin from the surface and pushes blackheads and pollutants out of the pores without irritation.
▸ Galvanic anion at the Absorb (-) mode delivers (/ pushes) the nutrients of the cosmetic deep into the skin while the micro current flowing over the surface will brighten the skin tone.
▸ Galvanic cation in Lifting (+) mode will tighten and firm the skin to improve skin elasticity.
▸ It is lightweight, convenient in size and shape, can stand upright and is easy to charge with a USB-C cable.
▸ Take the expensive salon treatments home and when you travel.

HOW TO USE
1. Long press the button to turn on/off the device.
2. Press once to change mode.

Mode 1 - Peeling: 
1. Use on wet skin after cleansing with facial cleanser.
2. Press the button to start the peeling mode and place the tip of the blade on the skin (with the logo and button facing away from you).
3. Gently move the blade in the direction below (from the inside out and from the bottom up) to push the water away and remove dead skin cells, sebum and impurities from the pores. Do not scrape the skin.
4. For best results, use this mode for 5 minutes, max. 3~4 times a week.
(automatically turns off after 5 minutes)

Mode 2 - Absorb [-]: injects (-) electrodes to improve absorption of skin care products.
1. Apply nourishing skin care product like essence / serum / ampoule /sheet mask to the skin.
2. Press the button to start absorb mode and place the blade on the skin (with the logo and button side towards you).
3. Gently move the blade in the direction shown below (from the inside out) to massage in the products.
4. For best results, use this mode for 5 minutes, at least 3~4 times a week or daily.
(automatically turns off after 10 minutes)

Mode 3 - Lifting: generates (+) electrodes that tighten the skin for firmer skin and reduced enlarged pores.
1. Apply a moisturizing/nourishing cream to the face.
2. Press the button to start lift mode and place the blade on the skin (with the logo and button facing you).
3. Gently move the blade in the direction indicated below (from the inside out) to massage the products into the skin.
4. For best results, use this mode for 5 minutes 3~4 times a week or daily.
(automatically turns off after 20 minutes)

CAUTIONS!
▸ With galvanic ions in mode 2 and 3 you can experience small shocks, this is caused by microcurrent. It has no harm to human body.
▸ Not suitable for children under 13 years old.
▸ The galvanic functions are not suitable for use during pregnancy.
▸ Do not submerge in water.
▸ Store in dry places, avoid humid places such as in the bathroom.
▸ Make sure that the device is fully charged (1 hour) when using it for the first time.
▸ To activate the galvanic function, make sure the hand contacts the lower part of the device as shown below.

SPECIFICATION
Box content: Water Peeling, user manual
Size: 160 x 60 x 35 mm
Weight: 113g
Rated voltage: 5V---1A
Battery: 3.7V / 600mAh
Full charge time: 1 hour
Charging port: USB-C
Warranty: 1 jaar (keep proof of purchase)

Haru Haru Beauty is the official distributor and partner of Face Factory in The Netherlands.